pH is a term that is used to measure whether something is acidic (low pH) or basic (high pH). This reading is expressed in a scale in a range from 0-14. Swimming pool water should be maintained at a neutral pH of between 7.2-7.6. Maintaining the proper pH level helps maintain your pool equipment, allows […]
Many factors influence the pH of pool and spa water therefore many different causes of pH change exist. The ideal range for pH is 7.2-7.6. Some possible causes for change are; 1. Rain Water 2. Use of chlorine tablets (trichlor) 3. Bromine tablets will lower pH 4. Gas chlorine dramatically lowers pH 5. Sodium Hypochlorite […]
pH is the measure of the acidity of the water. The lower the pH the more acidic it is and the higher the pH the more basic it is. Maintaining pH, or potential Hydrogen, is simple and easy when you understand just a few basics. pH ranges from 0-14 with 7 being neutral. Your pool […]
Total Alkalinity is the measure of all of the alkaline substances that can be found in your pool or spa. Your main focus when dealing with Total Alkalinity is to measure your calcium carbonate, keeping your calcium carbonate in a safe range will help with the up keep of your pool and much more. Your […]
Many factors go into answering this question. Some possible reasons are; 1. Dirty filter or baskets (skimmer & strainer) 2. not running the filter & pump long enough each day 3. Chemical problem Lets discuss each. If you have a sand filter, the sand may need to be replaced or just try getting the proper […]
Here is a list and short descriptions of factors that can affect the quality of your pool water. Please note that all of the information below is generic and will not apply exactly the same way to all pools. Be sure to discuss any questions or concerns with your local pool professional. Bathing Load – […]
When using any chemical products always ready the labels carefully and follow directions precisely. Chemicals protect you when they are used correctly in your pool or spa. Here are some generic safety precautions, but please always read and follow the label directions. 1. Use exact quantities specified, not more. Do not overdose. 2. Don’t mix […]
A swimming pool has a skimmer where the pool water goes into and from there into the filter and then back to the pool thru the return wall fitting. Have you notices your return water flow is not as strong as it used to be? What could be causing this? If you have a Cartridge […]
After a few years of normal operation your pool filter sand gets full of particles and debris that will cause your chemicals to not work as well as they normally should. Changing your sand is a simple process that should be done at least every 3-5 years to make sure your pool operates at 100%. […]
Have you noticed the look of your pool water is not as clear as it used to be? Have you noticed no matter how much water clarifier you put into your pool, the water is still cloudy? Have you noticed the sanitizer level is not as stable as it used to be? Do you notice […]